High water bill with no visible cause? Sound of running water when everything is off? A hidden water leak can waste thousands of gallons and silently destroy walls, floors, and foundations before you ever see a wet spot. Our licensed Mira Loma leak detection specialists use acoustic listening devices, thermal imaging, and pressure testing to pinpoint leaks without tearing apart your home. Same-day service available.
A dripping faucet is obvious. A hidden leak is not — and that is what makes it far more dangerous. A slow leak inside a wall, under a concrete slab, or in an underground supply line can go undetected for months while it quietly soaks insulation, rots wooden framing, grows mold colonies, and undermines your foundation. By the time surface signs appear — staining, bubbling paint, cracked floors — significant damage has already occurred.
In Mira Loma and across Riverside County, hidden leaks are more common than most homeowners realize. The area's hard water accelerates internal pipe corrosion, the extreme summer heat stresses pipe materials and joints, and the expansive clay soil that swells and contracts with seasonal moisture puts constant pressure on underground supply lines. Older homes in Glen Avon, Pedley, and parts of Jurupa Valley with original copper supply lines are especially vulnerable.
The good news: our non-invasive leak detection technology locates leaks precisely — inside walls, under slabs, and underground — without the need to blindly punch holes or tear up floors searching for the source. We find it first, then open only what is necessary to fix it. This saves you thousands in unnecessary demolition and restoration costs.
Hidden leaks rarely stay completely hidden forever — your home sends signals. Catch these early and the repair is far simpler and cheaper.
If your water bill has jumped significantly with no change in usage, a hidden leak is almost certainly the cause. A single half-inch pipe leak can waste over 250 gallons per day — over 7,500 gallons per month. The EPA estimates U.S. households waste 10,000+ gallons per year from leaks alone.
Hearing water running inside walls, under floors, or in the ceiling when all fixtures are off is one of the clearest signs of an active hidden leak. This sound comes from water escaping under pressure through a crack or failed fitting inside the pipe system.
Warm or damp patches on your tile or hardwood floor — especially on a concrete slab foundation — are a hallmark sign of a slab leak. A supply line leaking beneath your concrete floor warms the slab above and saturates the ground, causing soft spots in finished flooring.
Yellow, brown, or rust-colored stains appearing on walls, ceilings, or around baseboards indicate water is migrating through building materials. By the time staining is visible on a finished surface, significant saturation has usually already occurred behind it.
Mold growth on walls or ceilings — or a persistent musty smell without visible water — almost always indicates hidden moisture. Mold can begin growing within 24 to 48 hours of water exposure, and what you smell may be an established colony inside your walls well before it becomes visible.
New cracks appearing in walls, flooring, or your foundation — especially if accompanied by other signs — may indicate water damage weakening structural materials. Foundation cracks can also be caused by a slab leak softening the soil beneath the concrete, causing settlement and movement.
Every day a hidden leak goes undetected, the damage compounds. Early detection is always cheaper than late repair.
We use multiple professional-grade technologies to locate leaks precisely before any access opening is made — minimizing damage to your property.
Our electronic acoustic sensors amplify the sound of water escaping under pressure through pipe walls, concrete slabs, and soil. Even a very small leak produces a detectable frequency — our equipment can hear it through several inches of concrete or inside a finished wall. By moving the sensor across the suspected area and triangulating the sound, we narrow the leak location down to within inches without making a single hole.
Our infrared thermal imaging camera detects temperature differences in walls, floors, and ceilings. A leaking pipe cools the surrounding material as water evaporates, creating a distinct cold signature that the camera displays as a different color zone on screen. This technology is especially effective for finding pipe leaks inside walls and slab leaks where warm water pipes are creating hot spots in the floor above.
We isolate sections of your plumbing system and apply controlled water pressure, then monitor for pressure drop over time. Any pressure loss confirms a leak in that section of pipe. By systematically testing different zones — supply lines, hot vs cold, indoor vs outdoor — we narrow the location even before deploying acoustic or thermal equipment. Pressure testing is especially effective for underground supply line leaks.
For suspected drain line leaks and sewer pipe damage, we deploy a waterproof HD camera to visually inspect the interior of the pipe. This directly confirms the presence of cracks, failed joints, or holes in the pipe wall — eliminating any uncertainty about the location and type of damage before repair begins.
From leaks inside walls to underground supply line failures — we locate and repair every type of hidden water leak in Mira Loma homes.
Supply pipes running beneath your concrete foundation — extremely common in Mira Loma due to hard water corrosion and clay soil movement. See our dedicated slab leak repair page for full details.
Supply and drain pipes running inside walls can corrode, crack at fittings, or fail at joints. Our acoustic and thermal detection finds these without blindly opening walls throughout your home.
The main supply line from the city meter to your home runs underground. Pressure testing and acoustic detection locate underground leaks without trenching your entire yard to find them.
Water staining on ceilings or bubbling between floor tiles indicates a leak above or below. Our thermal camera traces the moisture path back to the source — which is often several feet from where the staining appears.
A toilet leaking at the base, a slow drip at a supply valve, or a leaking shutoff under a sink can waste hundreds of gallons without pooling visibly. We test all fixtures systematically to rule out these common hidden waste sources.
Unexplained water usage on your bill may be coming from pool plumbing, irrigation lines, or outdoor supply connections rather than indoors. We test and locate outdoor system leaks using the same professional pressure testing and acoustic technology.
From your call to a repaired pipe — every step is transparent and designed to minimize disruption to your home.
We start with pressure testing across system zones to confirm and isolate which section of your plumbing has an active leak, before any detection equipment is deployed.
Using acoustic sensors, thermal imaging, and moisture meters, we locate the exact position of the leak — down to within inches — without opening walls or floors.
We open only what is necessary to access the leak — no exploratory damage. If the thermal camera shows the leak at a specific wall location, we open only that spot.
The pipe is repaired using the right method for your pipe type and damage severity. We pressure-test the repair before closing up and leaving — fully guaranteed.
Locating a hidden leak requires more than a good plumber — it requires the right equipment, proper training, and knowledge of how Mira Loma's specific conditions cause pipes to fail. We know that hard water from Riverside County's supply corrodes copper pipe fittings faster than average, that the clay soil under older Glen Avon and Pedley homes puts lateral stress on underground supply lines, and that summer heat extremes accelerate pipe material fatigue.
That local knowledge, combined with our professional detection equipment, means we find leaks faster and with significantly less property damage than plumbers who resort to exploratory wall opening. Our goal is always the smallest possible access point to make the largest possible repair.
We provide Leak Detection to homeowners and businesses across the Inland Empire. Here are a few of the cities we serve most often for this service.
Straightforward answers from your local Mira Loma leak detection team.
Suspect a hidden leak? High water bill? Sound of water running? Our licensed leak detection specialists find it fast with non-invasive technology — same-day service across all of Mira Loma and Riverside County.